Advertisement
Free Standing Installation
Fitting between existing cabinets
The height of the dishwasher (845 mm) has been
designed to allow the machine to be fitted between
existing cabinets of the same height. The feet can be
adjusted so that correct height is reached.
The laminated top of the machine does not require
any particular care since it is heatproof, scratchproof
and stainproof.
Underneath existing work top
In most kitchens, there is only one single work top under which cabinets and electrical
appliances are fitted. In this case remove the top of the dishwasher by unscrewing the
screws under the rear edge of the top (a).
The height can then be reduced to 815 mm, as scheduled by the International Regulations
(ISO) and the dishwasher will fit perfectly under the kitchen bench top.
Attention
After removing the top, the screws must be screwed again under the rear edge of the top
(b).
13
Advertisement
