Advertisement
How to Connect the Safety Supply Hose
1.
Pull the safety supply hoses completely out from storage compartment located at
rear of dishwasher.
2.
Tighten the screws of the safety supply hose to the faucet with 3/4-inch thread.
3.
Ensure the water is on before starting the dishwasher.
How to Disconnect the Safety Supply Hose
1.
Turn off the water.
2.
Unscrew the safety supply hose from the faucet.
Connection of Drain Hoses
Insert the drain hose into a drainpipe with a minimum diameter of 4cm or let it run into the
sink, making sure to avoid bending or crimping it. The height of drainpipe must be less than
1000mm. The free end of the hose must not be immersed in water to avoid the back flow of
it.
Securely attach the drain hose in either position A or position B
Back of dishwasher
Mains Cable
Drain hose
Water Inlet
Drainpipe
A
B
40 mm
Counter
11
Advertisement
