Advertisement
Built-in Installation (for the integrated model)
Step 1: Selecting the best location for the dishwasher.
The installation position of dishwasher should be near the existing inlet and drain hoses and
power cord.
1.
Ensure there is a gap of no more than 5mm between the top surface of the dishwasher
and the underside of the kitchen cabinet.
2.
If dishwasher is installed at the corner of the cabinet, there must be adequate space to
allow the door to open.
Note:
Depending on where your electrical outlet is, you may need to cut a hole in the
opposite cabinet side.
14
90°
820mm
580mm
600mm (for 60cm model)
450mm (for 45cm model)
Dishwasher
dishwasher
Minimum space of 50mm
90°
Electrical, drain
and water supply
line entrances
Space between cabinet
bottom and dishwasher
floor
Cabinet
Door of
80
100
Advertisement
