Advertisement
Starting A Cycle Wash
1.
Load the dishes and push the baskets back in place. It is recommended to load
the lower basket first, then the upper one.
2.
Pour in the detergent.
3.
Ensure the dishwasher is plugged into an electrical outlet and turned on. Make
sure that the water supply is turned on to full pressure.
4.
Close the door, press the Power button, to switch on the machine.
5.
Choose a program, the indicator light will turn on. Then press the Start/Pause
button, the dishwasher will start its cycle.
Changing the Program Mid-cycle
A wash cycle can only be changed if it has been running for a short time otherwise, the
detergent may have already been released and the dishwasher may have already drained
the wash water. If this is the case, the dishwasher needs to be reset and the detergent
dispenser must be refilled. To reset the dishwasher, follow the instructions below:
1.
Press the Start/Pause button to pause the washing.
2.
Press program button for more than 3 seconds - the program will cancel.
3.
Press the program button to select the desired program.
4.
Press the Start/Pause button, after 10 seconds, the dishwasher will start.
30
3 sec
Intensive
Heavy
ECO
Advertisement
