Bosch Active Line Original Operating Instructions page 209

English – 2
The drive unit detects the gear shift and briefly reduces the
drive assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
You can find information about the version of your gear sys-
tem in the menu <Settings> → <My eBike> → <Compon-
ents>.
For more information, read the operating instructions for
your operating unit.
eShift with 3×3 Nine
Always use the Speedhub gearstick to shift gears with 3×3
Nine.
Keeping the gearstick pushed down causes the system to
keep shifting gear in increments of three after the first gear
change, until the lowest or highest gear is reached.
eShift with the Intuvia 100 On-Board Computer
The engaged gear will be shown briefly on the display
whenever the gear is shifted.
The drive unit detects the gear shift and briefly reduces the
drive assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
eShift with the Kiox 300/Kiox 500 On-Board
Computer
The gear is always displayed in the start page. If you are on
another screen, the gear will be briefly shown on the display
each time it is changed.
The drive unit detects the gear shift and briefly reduces the
drive assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
You can find information about the version of your gear sys-
tem in the menu <Settings> → <My eBike> → <Compon-
ents>.
For more information, read the operating instructions for
your operating unit.
207
0 275 007 3ES | (30.03.2023) Bosch eBike Systems