D-Link DIR-806A User Manual page 106

DIR-806A Wireless AC750 Multi-Function Router
User Manual
Parameter
MAC
Figure 80. The page for creating a new connection. The IP section.
Parameter
IP Address
Netmask
Gateway IP address
Primary DNS server/
Secondary DNS server
Enable RIP
A MAC address assigned to the interface. This parameter is
mandatory if your ISP uses MAC address binding. In the field, enter
the MAC address registered by your ISP upon concluding the
agreement.
You can click the Clone MAC Address button (
MAC address of the network interface card (of the computer that is
being used to configure the router at the moment) as the MAC
address of the WAN interface.
Also you can set the address of a device connected to the router's
LAN at the moment. To do this, select the relevant value from the
drop-down list (the field will be filled in automatically).
IP
Enter an IP address for this WAN connection.
Enter a subnet mask for this WAN connection.
Enter an IP address of the gateway used by this WAN connection.
Enter addresses of the primary and secondary DNS servers in the
relevant fields.
Select the checkbox to allow using RIP for this connection.
Page 106 of 233
Configuring Device (Router Mode)
Description
Description
) to set the