D-Link DIR-806A User Manual page 131

DIR-806A Wireless AC750 Multi-Function Router
User Manual
To activate the WPS function, select the WPS Enable checkbox on the 2.4 GHz or 5 GHz tab and
click the Apply button. When the checkbox is selected, the Information and Connection
sections are available on the tab.
Parameter
Default PIN code
WPS Status
SSID
Network Authentication The network authentication type specified for the WLAN.
Encryption
Encryption key
Refresh
Reset to unconfigured
WPS Method
PIN Code
Connect
The PIN code of the router. This parameter is used when connecting
the router to a registrar to set the parameters of the WPS function.
The state of the WPS function:
Configured (all needed settings are specified; these settings
•
will be used upon establishing the wireless connection)
Unconfigured (after activating the WPS function, needed
•
settings will be configured automatically: the MAC address of
the wireless interface will be added to the SSID, the network
authentication type will be changed to WPA2-PSK with a
random encryption key).
The name of the router's WLAN.
The encryption type specified for the WLAN.
The encryption key specified for the WLAN.
Click the button to refresh the data on the page.
Click the button to generate new settings for the router's WLAN
automatically after activating the WPS function.
A method of the WPS function. Select a value from the drop-down
list.
PIN: Connecting the device via the PIN code.
PBC: Connecting the device via the push button (actual or virtual).
The PIN code of the WPS-enabled device that needs to be connected
to the wireless network of the router.
The field is displayed only when the PIN value is selected from the
WPS Method drop-down list.
Click the button to connect the wireless device to the router's WLAN
via the WPS function.
Page 131 of 233
Configuring Device (Router Mode)
Description