D-Link DIR-806A User Manual page 109

DIR-806A Wireless AC750 Multi-Function Router
User Manual
Parameter
Static IP Address
PPP debug
IP received
Enable RIP
NAT
Firewall
Ping
When all needed settings are configured, click the Apply button.
Fill in the field if you want to use a static IP address to access the
Internet.
Select the checkbox if you want to log
debugging.
The IP address assigned by the ISP.
Select the checkbox to allow using RIP for this connection.
Select the checkbox if you want one WAN IP address to be used for
all computers of your LAN.
Select the checkbox to enable protection against ARP and DDoS
attacks.
Select the checkbox to allow the router to answer ping requests from
the external network through this connection. For security reasons,
it is recommended not to select this checkbox.
Page 109 of 233
Configuring Device (Router Mode)
Description
all data on PPP connection