D-Link DIR-806A User Manual page 145

DIR-806A Wireless AC750 Multi-Function Router
User Manual
Parameter
Type
VLAN ID
Port
QoS
Tag
Click the Apply button.
Click the Delete port button to delete the port highlighted in the table at the bottom of the page.
Click the Delete VLAN button to delete this group of ports form the system.
For further use of groups of ports for VLAN it is required to save the changed settings to
!
the non-volatile memory of the router and reboot it (click the Save&Reboot line in the
top-page menu displayed when the mouse pointer is over the System caption).
The type of the VLAN which identifier is specified in the VLAN ID
field.
Local. The group of this type is a channel used to connect local
clients to the router. It is mostly used to connect different types of
clients, which require separate connection settings.
NAT. The group of this type is an external connection with address
translation. It is mostly used to connect to the Internet. Later the
VLAN which identifier is specified in the VLAN ID field is used to
create a WAN connection (on the Net / WAN page).
Transparent. The group of this type is a transparent connection
between an internal port and an external connection. It is mostly
used to connect IPTV set-top boxes.
An identifier of the VLAN to which this group of ports will be
assigned.
Ports
From the list, select an available value (a physical port of the router,
the wireless interface) to assign it to this group. The port will be
displayed in the table at the bottom of the page.
A priority tag for the traffic transmitted through the port highlighted
in the table at the bottom of the page.
Select a value for the port highlighted in the table at the bottom of
the page:
tagged,
•
untagged.
•
Page 145 of 233
Configuring Device (Router Mode)
Description