D-Link DIR-806A User Manual page 116

DIR-806A Wireless AC750 Multi-Function Router
User Manual
Parameter
Mode
DNS Relay
Start IP
End IP
Lease time
External DHCP server IP
When all needed settings are configured, click the Apply button.
In the Static DHCP section, you can specify MAC address and IP address pairs (set a fixed IP
address in the local area network for a device with a certain MAC address). The router assigns IP
addresses in accordance with the specified pairs only when the DHCP server is enabled (in the
DHCP server section, in the Mode drop-down list, the Enable value is selected).
An operating mode of the router's DHCP server.
Enable: the router assigns IP addresses to clients automatically in
accordance with the specified parameters. When this value is
selected, the DNS Relay, Start IP, End IP, and the Lease time
fields are displayed on the page.
Disable: the router's DHCP server is disabled, clients' IP addresses
are assigned manually.
Relay: an external DHCP server is used to assign IP addresses to
clients. When this value is selected, the External DHCP server IP
field is displayed on the page.
Select the checkbox so that the devices connected to the router
obtain the address of the router as the DNS server address.
Deselect the checkbox so that the devices connected to the router
obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
The IP address of the external DHCP server which assigns IP
addresses to the router's clients.
Page 116 of 233
Configuring Device (Router Mode)
Description