Omron SYSMAC C200H CPU01-E Installation Manual page 62

Mounting Requirements
DIN Rail Mounting
Bracket
Procedure
DIN Rail Mounting
Bracket
48
Downloaded from Elcodis.com electronic components distributor
All manuals and user guides at all-guides.com
The DIN Rail Mounting Bracket shown below is necessary for mounting the PC
to the DIN Rail.
1, 2, 3... 1. The following diagram is a view of the back of the Backplane. Attach one
Mounting Bracket to the left and right sides of the Backplane as shown be-
low.
Backplane
2. Mount the Backplane to the DIN Rail so that the claws on the Mounting
Brackets fit into the upper portion of the DIN Rail as shown below.
This claw fits into the DIN Rail
Backplane
Section 5-2
There are two Back-
plane mounting
screws each on the
left and right sides of
the Backplane. Use
these screws to at-
tach the DIN Rail
Mounting Brackets to
the Backplane.
DIN Rail
DIN Rail Mounting Bracket