Table of Contents
Advertisement
State of the connector with its projection side up
Marker of No. 1 pin
7)
Carry out pining and wiring to the solenoid valve.
Pipe the air tubes and wire the solenoid valve cables as shown in the figure.
6） Connect the assembled solenoid valve cable to
the solenoid valve.
Connect the solenoid valve cable you have con-
nected to 7 and 8 pins of the connector to the
7pin：Red
solenoid valve A.
Connect the solenoid valve cable you have con-
nected to 9 and 10 pins of the connector to the
8pin：Black
solenoid valve B.
9pin：Red
10pin：Black
– 7 –
A
B
Advertisement
Table of Contents
