JUKI AMS-221F Instruction Manual page 7


Example of installation of the
device to the air cylinder on the
right side
Pipe the air tubes to Y-shaped union  as shown in the figure.
4)
Temporarily secure automatic switches of automatic switch asm.  (40190155) to the air cylinder. Accu-
5)
rate positioning of the switches is to be carried out after the wiring to the electrical control box.
Refer to the table and figure given below for the installing position.
Automatic switch marker
number
5
6
7
8
Marker No. 6
Marker No. 8
Position of the Cylinder rail
cylinder
LEFT UPPER
RIGHT UPPER
LEFT UNDER
RIGHT UNDER
– 5 –
Automatic switch marker number
Automatic switch asm.  :
40190155