EMG Marlon Marilyn STC-8101LC User Manual page 51

A S SE M BL E T H E E BI K E
The delivered bicycle will already be almost completely assembled.
Make sure you adjust the saddle and handlebars well according to your height. Also
be sure to attach the pedals carefully to avoid problems when riding the bike.
It is very important for safety to tighten threaded fasteners to the correct torque.
Always tighten fasteners to the correct torque.
If there is a conflict between the instructions given in this manual and the infor-
mation provided by the manufacturer of a component, consult a qualified bicycle
mechanic or customer service operator for clarification.
Overtightened bolts can stretch and deform. Bolts that are too loose can move and
be subjected to strain. Either mistake can result in sudden bolt failure.
Always use a properly calibrated torque wrench to tighten critical fasteners on your
bicycle.
Carefully follow the torque wrench manufacturer's instructions on the correct way to
set up and use the torque wrench to obtain accurate results.
R E C O M M E N D E D TO R Q U E O N
M5: 5-6Nm
M6: 9-10Nm
M7: 11-12Nm
M8: 14-15Nm
If in any doubt about the assembly of your bicycle, consult a qualified bicycle mechanic
or dealer customer service operator for clarification.
FA S T E N E R S
51