Table of Contents
Advertisement
if one of the following malfunctions occur, immediately stop operation, turn off the main switch and contact
the authorized Technical Service:
• You smell something burning.
• Anyone of Error Codes E1, E2, E3, E4, E5 and E6 displays on the Indoor Unit.
• Remote controller is malfunctioning, or its buttons do not work well.
• A safety device such as a fuse or a breaker frequently actuates.
• Obstacles or water enter the Unit.
• Water leaks from Indoor Unit.
• Other malfunctions are observed.
AUTOMATIC RESTART AFTER A POWER FAILURE
• When a power failure occurs during operation, the air conditioner stops immediately.
• When power is restored, the "OPERATION" lamp on the Indoor Unit starts blinking.
• In particular, the air conditioner will restart automatically after 3 minutes have elapsed
since power is restored. This means that it is not required to press the "ON/OFF" button
on the remote control.
The settings will be the same as before the blackout.
However, it is necessary to program TIMER again, as in case of a blackout, TIMER
settings for automatic start/stop of the air conditioner are cancelled.
TROUBLESHOOTING
!
Never try to repair the Air Conditioner by yourself
CAUTION
-37-
Advertisement
Table of Contents
