Sleep" (Energy Saving) Function - Hokkaido FREE MATCH HKEU 265 XR User Manual

SLEEP Mode
Before you go to bed, you can press SLEEP button and
the air conditioner will run so as to make your sleep
more comfortable.
Use of SLEEP function
After the Unit's start, select COOL, HEAT or AUTO mode
and then press SLEEP button once to activate "Sleep"
Energy Saving function.
In SLEEP mode, fan speed is automatically controlled by
inner electronics.
After 7 hours of continuous operation in SLEEP mode,
Unit will automatically stop.
SLEEP function is available in COOL, HEAT and AUTO modes.
COOL Mode
START OF
SLEEP FUNCTION
Steady temp.
7 hours
1 hour
1°C increase
1 hour
1°C increase
SET TEMPERATURE
HEAT Mode
SET TEMPERATURE
1 hour
1°C decrease
1 hour
1°C decrease
Steady temp.
7 hours
START OF SLEEP FUNCTION
To cancel SLEEP function
Press SLEEP button again to cancel the function.
WARNING! If Unit is operating and SLEEP function has been selected, the function is cancelled if
whatever button of remote control is pressed.

"SLEEP" (ENERGY SAVING) FUNCTION

1. COOL Mode
STOP
After SLEEP function has started off, set temperature
OF UNIT
increases by 1°C each hour for 2 hours.
Then, SLEEP mode runs at steady temperature and LOW
fan speed.
Actual temperature is higher than set temperature to
prevent the room from getting too cold.
This function also allows to save electricity.
2. HEAT Mode
After SLEEP function has started off, set temperature
decreases by 1°C each hour for 2 hours.
Then, SLEEP mode runs at steady temperature and LOW
fan speed.
Actual temperature is lower than set temperature to
prevent the room from getting too hot.
This function also allows to save electricity.
STOP
OF UNIT
3. AUTO Mode
SLEEP function runs according to AUTO operation mode.
SET TEMPERATURE( C)
AUTO
COOL
DRY
HEAT
MODE
DIRECTION
/SWING
CLEAN
AIR
FOLLOW
SELF
CLEAN
-23-
FAN
~ ~
~
~
HIGH
MED
LOW
ADJUST
ON/OFF
FAN SPEED
TIMER ON
SLEEP
TIMER OFF
RESET LOCK
LED
TURBO
ME
DISPLAY