Table of Contents
Advertisement
AUTO Mode
SET TEMPERATURE
AUTO
COOL
DRY
HEAT
ADJUST
3
ON/OFF
MO
DE
1
DIRECTION/
SLEEP
SWING
CLEAN
AIR
RESET LOCK
SELF
FOLLOW
CLEAN
ME
NOTES:
In "AUTO" mode, it is not possible to select your desired fan speed, as it will be automatically
1.
controlled by the microcomputer (no fan speed indicator displays).
2.
"AUTO" mode, as well as other operation modes, is memorized by the microcomputer, so if you
would like to keep it at nexr restart of the air conditioner, you only need to press "ON/OFF" button
on remote controller.
3.
It is possible to change operation mode while the air conditioner is running in "AUTO" mode.
However, the Unit will not immediately start operating according to the new mode, but a little delay
is needed for carrying out a test and choosing new operating parameters.
AUTO OPERATION
(°C)
FAN
~
~
~
~
HIGH
MED
LOW
2
FAN SPEED
TIMER ON
TIMER OFF
LED
TURBO
DISPLAY
When AUTO mode is selected, the air conditioner
automatically chooses the suitable operation settings
according to room temperature and eventually to the
temperature set by the User.
The four possible options are among: "COOL", "DRY",
"HEAT", "FAN".
Connecting/operating the air conditioner
Connect the air conditioner to the power source:
"OPERATION" LED on Indoor Unit's panel will start
flashing.
Select "AUTO" mode by pressing "MODE" button.
1.
Select your desired temperature by pressing
2.
"ADJUST" buttons.
3.
Press "ON/OFF" button to start the air conditioner:
"OPERATION" LED on Indoor Unit's panel will
stop flashing and will light up.
Stop
Press "ON/OFF" button on remote control to stop the
air conditioner's operation.
-19-
Advertisement
Table of Contents
