Emergency Operation And Test Switch - Hokkaido FREE MATCH HKEU 265 XR User Manual

EMERGENCY OPERATION AND TEST SWITCH

Frontal panel
Manual control button
Operation in Emergency mode:
If you have lost the remote controller or its batteries are exhausted, the air conditioner can be started
by pressing the "AUTO/COOL" Manual control button on the frontal panel.
Press "Manual" button once: "OPERATION" lamp on Indoor Unit will light up, and the air conditioner
will work in forced AUTO mode.
The default setting temperature is 24°C.
Testing the air conditioner:
If you press "Manual" button, operation mode is shifted in an order as: AUTO -- COOL -- OFF.
Operate Unit in forced COOL mode.
This is used for Testing purposes only.
End of operation in Emergency mode or Test mode:
Press once the "AUTO/COOL" Manual control button on the front panel while the air conditioner is
operating in Emergency mode or in Test mode: operation will be immediately stopped. Use the remote
controller to return to normal operation.
NOTE: Do not use the Test function as the normal operating mode of the air conditioner.
Control panel
To reach the control panel, lift the front panel before.
AUTO/COOL
-27-
•
Opening the front panel:
Pull up the front panel at both ends till a click
is heard and the panel remains fixed. Do not
lift the panel any further because the hinges
could get broken.
Closing the front panel:
•
Push down the front panel at both ends. Close
the panel firmly.