Garmin TACX ANTARES Quick Start Manual page 4

Dowel Pin Position
Adjusting the Spring Holders
Before your first ride, you must set the spring holders on the trainer to fit your bike.
TIP: Repeat these steps each time you change bikes.
1 Remove the spring holders
2 Remove the dowel pins
4
Max. Distance
1,100 mm
1,080 mm
1,060 mm
1,040 mm
1,020 mm
1,000 mm
980 mm
from the frame .
and springs from the spring holders.
Min. Distance
1,080 mm
1,060 mm
1,040 mm
1,020 mm
1,000 mm
980 mm
less than 980 mm
Quick Start Manual