Playing Back A Card; Recording Pictures On A Card To A Tape - Panasonic NV-DS27 Operating Instructions Manual

5
s r
SEARCH FADE
6 5 º
2
CARD MULTI
1, 3
2, 3
2
MENU
1
"
PICTURE
640 640
640 640
# $
No.25
&
3
1
TAPE CARD
FOCUS
MENU
NOW RECORDING
34

Playing Back a Card

It plays back images recorded on a Card.
1
STILL BLC
; 1
2
CAMERA
VCR
CARD
1
File Name
P.B
1
MODE
2
Picture Size
OFF ON
3
The number of the image
To Select a Desired Image and Play It Back
1 1 1 1
!
2 2 2 2
3 3 3 3
5
Picture Size
6
File Number
7
File Name
Using Picture Search Mode
1
2
640
640
For other notes concerning this item, see page 42.
%
IMGA0012.JPG
~~~~~~~~~~~~~~~~~~~~~~~~

Recording Pictures on a Card to a Tape

Card Images can be recorded on the Tape one at a time or all automatically.
To Copy 1 Picture
1
2
3
To Copy All the Pictures
1 1 1 1
2 2 2 2
REC
≥For other notes concerning this item, see page 42.
Press the [MODE] Button to select the Card Playback Mode.
≥The [CARD P.B] Lamp lights up.
≥The still picture that was recorded last on the Card is displayed.
Press the [6] Button or [5] Button to display the desired
picture.
≥Each time the button is pressed the picture returns or is sent.
Press the [CARD MULTI] Button.
≥The still pictures recorded on the Card are displayed in Multi-Picture
4
Mode.
Turn the [PUSH] Dial and select a desired picture.
≥The selected picture is marked with a frame.
≥When 7 or more pictures have been recorded, turn the [PUSH] Dial to
display the next picture. (The [6] Button or [5] Buton can be used
instead of the [PUSH] Dial.)
Press either the [PUSH] Dial or the [CARD MULTI] Button.
≥The selected picture is shown on the entire screen.
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [PICTURE
SEARCH] >> [YES].
Turn the [PUSH] Dial and select the desired picture number,
and press the [PUSH] Dial.
Slide the [TAPE/CARD] Selector towards [TAPE].
Display a desired picture.
Press the [PHOTO SHOT] Button.
≥It takes a few seconds to record a picture to the Tape.
Display the first picture.
≥If a picture other than the first one is displayed, only the subsequent
pictures will be copied.
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [RECORD
TO TAPE] >> [YES].
≥It takes a few seconds for each picture to be copy on the Tape. To stop
the copying midway, press the [∫] Button.
≥During the copying, the Indication
8
1
appears.