Playing Back Card - Panasonic NV-GS85GC Operating Instructions Manual

LSQT1123_ENG.book 100 ページ ２００６年１２月２５日 月曜日 午前９時４５分
ª To display the on-screen information
on the TV
The information displayed on the LCD monitor or
the viewfinder (operation icon, time code and
mode indication, etc.) can be displayed on the
TV.
(This operation is only available when using
the remote control.)
1
Press the [EXT DISPLAY] button on the
remote control.
≥Press the button again to erase the
information.

Playing back card

≥Set to Card Playback Mode.
(An operation icon automatically appears on
the LCD monitor.)
1
Operate with joystick.
E
: Plays back the previous picture.
D
: Plays back the next picture.
1/∫:
Slide show (Plays back the still pictures
on the card in order) start/pause
100
LSQT1123
Playback mode
≥The power will not turn off when the LCD
monitor and the viewfinder are closed and
retracted during Tape/Card playback mode.
≥Even if the operation icon does not appear, the
previous or next picture can be displayed.
≥While the data on a card are played back, do
not operate the mode dial.
≥When the access lamp is lit, do not remove a
card.
≥Depending on the picture size, it may take time
to display the file.
≥If you attempt to play back file recorded in a
different format or file data is defective, the
whole display becomes bluish and the
"UNPLAYABLE CARD'' indication may appear
as warning.
≥When playing back still pictures recorded in 4:3
mode ( ) on a wide-screen TV, the picture
0.3
M
quality may deteriorate.
≥When playing back a file recorded on other
equipment, the date and time display is different
from when it was recorded.
ª
To display multiple playback files
Multiple files on the card (6 files on 1 screen) are
displayed.
1
Move the [s
screen images.
Towards [i]: Full-screen display
(Displays 1 image.)
Towards [`]: Multi-screen display
(Displays 6 files on 1 screen.)
≥In the multi-screen display,
≥Move the joystick to select a file (The
selected file will be encircled by a orange
frame) and press to determine it. The
selected file is full-screen displayed.
≥If there are 7 files or more, then move the
joystick. The next, or previous multi-screen
will be displayed.
/VOLr] lever to switch the
100-0001