Playing Back A Card; Recording Pictures Ona A Card To A Tape - Panasonic NV-DS28A Operating Instructions Manual

M- SEARCH + FADE $Thl BLE
NOW RECORDING
Playing Back a Card
It plays back images recorded on a Card.
Press the [MODE] Button to select the Card Playback Mcde.
@The [CARD P.B] Lamp lights up. :
©The still picture that was recorded last on the Card is displayed.
2 Press the [<<] Button or [>>] Button to display the desired
picture.
Each time the button is pressed the picture returns or is sent.
@ File Name
@ Picture Size
© The number of the image
To Select a Desired image and Play It Back
1 Press the [CARD MULTI] Button.
©The still pictures recorded on the Card are displayed in Multi-Picture
Mode. @
2 Turn the [PUSH] Diai and select a desired picture.
The selected picture is marked with a frame.
®When 7 or more pictures have been recorded, turn the [PUSH] Dial to
display the next picture. (The [<4] Button or (» ] Buton can be used
instead of the [PUSH] Dial.)
3 Press either the [PUSH] Dial or the [CARD MULTI] Button.
®The selected picture is shown on the entire screen.
© Picture Size
@ File Number
@ File Name
Using Picture Search Mode
1 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [PICTURE
SEARCH] >> [YES].
2 Turn the [PUSH] Dial and select the desired picture number,
and press the [PUSH] Dial.@
For other notes concerning this item, see page 42.
FD Ot POD Peet rat Prat Pat Pad Prd Pap Prag Cap Prat Pa Pah as Pra Pad Crud tad ad Mead rat Pad
Recording Pictures on a Card to a Tape
Card Images can be recorded on the Tape one at a time or all automatically.
To Copy 1 Picture
1 Slide the [TAPE/CARD] Selector towards [TAPE].
2 Display a desired picture. :
3 Press the [PHOTO SHOT] Button.
tt takes a few seconds to record a picture to the Tape.
To Copy All the Pictures
1 Display the first picture.
© if a picture other than the first one Is displayed, only the subsequent
pictures will be copied.
2 Set [CARD FUNCTIONS] >> [CARD EDITING] >> [RECORD
TO TAPE] >> [YES].
it takes a few seconds for each picture to be copy on the Tape. To stop
the copying midway, press the [Ill] Button.
© During the copying, the indication @} appears.
For other notes concerning this Item, see page 42.