Checking The Compatibility Of Vehicle And Accessories - r.LiNK CI-RL3-C3D Manual

1.2.

Checking the compatibility of vehicle and accessories

Requirements
Brand Compatible vehicles
Giulia (952) since model year 2016
Alfa Romeo
Stelvio (949) since model year 2017
Limitations
Video only
Factory rear-view camera
Video input signal
Guide lines
Version 11.09.2019
The interface inserts ONLY video signals into the infotainment. For inserting
Audio signals either the possibly existing factory audio-AUX-input or a FM-
modulator can be used. If 2 audio sources shall be connected to the
infotainment, an additional electronic is necessary to switch them.
Automatically switching-back from inserted video to factory rear-view camera is
only possible while the reverse gear is engaged. To delay the switch-back an
additional electronic part is required.
Only NTSC compatible.
If the interface does not receive the required information from the vehicle CAN-
bus, the guide-lines will not be supported.
HW:CAM (V98) / (V20)
Compatible systems
Connect Radio with 6.5 inch monitor and
Connect 3D navigation with 8.8 inch monitor
CI-RL3-C3D