Connection Of Video Sources - r.LiNK RL2-RLINK Manual

2.6. Connecting video sources
It is possible to connect two after-market video sources and one after-market rear-view
camera to the video-interface.
Before final installation of the peripheral devices, we recommend a test-run to detect a
incompatibility of vehicle and interface. Due to changes in the production of the vehicle
manufacturer there's always a possibility of incompatibility.
Connect the 6pin connector of the video cable to the 6pin connector of the video
interface.
Connect the rear-view camera's RCA to the female RCA
cable.
Note: The picture settings for CAM input have to be adjusted in AV2.
Connect the RCA of the video source 1 and video source 2 to the female RCA
„Video IN1" and
Version 22.08.2018
„Video IN2" of the video cable.
HW CAM(V31)/(V22)
„Camera IN" of the video
RL2-RLINK