2. Remove four deck screws and remove deck from between striding belt.
WARNING: Do not damage stride sensor when removing deck.
3. Remove the four Tinnerman clips.
4. Remove the eight Lifespring absorber screws and Lifespring absorbers from the frame.
Install LifeSpring Absorbers
1. Install the eight Lifespring absorber screws and Lifespring absorbers to the frame. Face each notch in the
Lifesprings towards the inside of frame. Torque to 27-33 in-lbs (31-38 kg-cm).
2. Install the four Tinnerman clips.
Page 65 of 143