Life Fitness Weekly Service Manual page 24

Anti-Slip Pads
Tools Required:
• #2 Phillips screwdriver
• Utility knife
• Clean cloth
• 50/50 mix of alcohol and water
Time:
20 minutes
Disconnect power source
1. Turn the power switch off.
2. Unplug power cord from power outlet.
WARNING: Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Remove Motor Cover
1. Remove screws securing motor cover to base assembly using a Phillips screwdriver.
2. Remove motor cover.
Remove Anti-Slip Pads
1. Use a utility blade to remove anti-slip pads from their locations, or try to break it off piece by piece.
WARNING: Do not cause personal injury or damage to the paint.
Item
1
2
3
Item
1
2
3 Screw, M4.2 x 19mm Phillips Head
Page 22 of 143
Description
Power cord outlet
Coax cable connector
Power switch
Description
Motor Cover
Base Assembly
Qty
1
1
1
Qty
1
1
4