Belt - Life Fitness Weekly Service Manual

Install Rear Roller
1. Install rear roller under striding belt.
2. Tighten rear roller adjusting screws to slightly tension striding belt.
Install Rear Roller Guards
Install screw and rear roller guard using a Phillips screwdriver. Tighten to 17-21 in-lbs. (19.5-24 kg-cm).
Striding Belt Tracking and Tensioning
1. Center striding belt about the front and rear rollers at approximately ½ inch (1.3 cm) from rear roller edge. Also
position the belt edges within the belt barrier.
Item
1
2
3
4
Length
38 ¾" (98.4 cm)
38 ¾" (98.4 cm)
38 15/16" (98.9 cm)
Page 101 of 143
Description
Screw
Rear roller guard
Grommet
Guard tab
Description
Loose length
Tensioned length for new
striding belt
Tensioned length for used
striding belt
Qty
2
2
2
2