Table of Contents
Advertisement
Linux Rocky Linux on RR2720A Installation Guide
5 Troubleshooting
If you do not install the system or update the kernel according to the installation manual, the
system will crash and you will not be able to enter. Please follow the steps below.
a. Choose "Rocky Linux (5.14.0-162.6.1.el9_1.x86_64) 9.1" and press enter the system
b. Install Linux Opensource driver.
c. Linux Opensource driver link, open the following link to enter the "Software
Download" page to download:
RR2700 Series:
d. Run the .bin file to install the driver package.
./rr272x_1x-linux-src_vxx.x.x_xx_xx_xx.bin or
sh rr272x_1x-linux-src_vxx.x.x_xx_xx_xx.bin
e. Follow the prompts to complete the driver installation.
6 Rebuilding Driver Module for System Update
When the system updates the kernel packages, the driver module rr272x_1x.ko should be
built and installed manually before reboot.
Please refer to the README file distributed with HighPoint RR2720A RAID Controller
opensource package on how to build and install the driver module.
https://www.highpoint-tech.com/rr272x-overview
- 11 -
Advertisement
Table of Contents
