Monitoring The Driver; Installing Raid Management Software - HighPoint RR2720A Installation Manual

Raid controller rocky linux

Hide thumbs Also See for RR2720A:

Table of Contents

Linux Rocky Linux on RR2720A Installation Guide

Follow the prompts to complete the driver installation.

m. After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/rr272x_1x. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/rr272x_1x /x

This command will show the driver version number, physical device list and logical device

list.

HighPoint RAID Management Software is used to configure and keep track of your hard

disks and RAID arrays attached to RR2720A RAID controller. Installation of the

management software is optional but recommended.

Please refer to HighPoint RAID Management Software documents for more information.

- 10 -

Table of Contents