Maintenance; Putting Out Of Service And Recycling - S&P CTB ECOWATT PLUS Manual

9. MAINTENANCE

Before manipulating the fan, make sure it is disconnected from the mains supply even if it has previously been switched off.
Prevent the possibility of anyone else connecting it while it is being manipulated.
Fan unit must be regularly inspected. These inspections should be carried out bearing in mind the machine's working condi-
tions, in order to avoid dirt or dust accumulating on blades, impeller, motor or grids. This could be dangerous and perceptibly
shorten the working life of fan unit.
While cleaning, great care should be taken not to unbalance blades or impeller.
All maintenance and repair work should be carried out in strict compliance with each country's current safety regulations.

10. PUTTING OUT OF SERVICE AND RECYCLING

EEC legislation and our consideration of future generations mean that we should always recycle materials where
possible; please do not forget to deposit all packaging in the appropriate recycling bins. If your device is also labeled
with this symbol, please take it to the nearest Waste Management Plant at the end of its servicable life.
EN
63