HEPA filter
replacement
Cleaning the
filters in the
wash cabinet
Cleaning the
A 800 tubular filter
Activating and
setting the
interval
Test programme
Various programmes are available for monitoring cleaning
performance in routine testing.
See "Maintenance" for more information on these programmes.
Filter maintenance
The air filter in the drying system must be replaced regularly with a
new one. For more information on changing the filter, see
"Maintenance / Changing the HEPA filter".
The filters in the wash cabinet must be checked daily and cleaned
regularly, see "Maintenance/Cleaning the filters in the wash cabinet".
A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.
The A 800 tubular filter can be used in special injector manifolds on
various mobile units and baskets and must be cleaned regularly.
Follow the cleaning instructions in the operating instructions for the
tubular filter.
A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.
Open the menu as follows:
button
Further settings
Filter maintenance
Filter combination
Filter combination
Active
Inactive
Active
-
The cleaning interval is activated.
Active
The
selection allows you to reset the counter or set the
cleaning interval.
Inactive
-
The cleaning interval is deactivated.
Select an option using the and arrow buttons and confirm your
choice with OK.
or
Tubular filter
Tubular filter
Active
Inactive
Further settings
91