Table of Contents
Advertisement
Volume
A buzzer which is integrated into the control panel can give an
acoustic signal in the following situations:
- When buttons are pressed (keypad tone)
- At the end of the programme
- System messages (information)
Open the menu as follows:
button
Settings
Volume
Volume
Keypad tone
Buzzer tones
-
Buzzer tones
Setting the buzzer volume for programme end and system
messages (information)
-
Keypad tone
Setting the buzzer volume for keypad tone.
Select an option using the and arrow buttons.
Confirm your selection with OK.
Keypad tone
When
has been selected you can adjust the volume
immediately. When
Warning
select which tone,
adjust the volume for.
Keypad tone
Quieter
The volume level is represented by a bar chart. On the lowest setting
the buzzer tone is switched off.
Use the arrow buttons (
Press OK to save the setting.
Buzzer tones
has been selected you must first
Programme end
or
Louder
Louder
) and (
Settings
, you would like to
Programme end
Quieter
Louder
Quieter
) to set the volume.
79
Advertisement
Table of Contents
