Table of Contents
Advertisement
Preparing the load
Only load items which have been declared by their
manufacturer as suitable for machine reprocessing may be
processed. The manufacturer's specific reprocessing instructions
must be observed.
Disposable items may not be reprocessed.
Special nozzles, irrigation sleeves or adapters may be required for
appropriate internal cleaning, depending on the load. These, together
with other accessories, are available from Miele.
Protective measures for personal safety must be observed.
Wear protective gloves when handling contaminated loads or use
appropriate tools, e.g. tweezers.
- Arrange the load so that wash water can access all surfaces. This
ensures thorough and proper cleaning.
- Do not place load items inside other items where they may be
concealed. Do not place load items so close together that cleaning
is hampered.
- Lumened items must be thoroughly cleaned, internally and
externally, by the wash water.
- Ensure that load items with long, narrow, hollow sections can be
flushed through properly before placing them in or attaching them
to an irrigation connector.
- Hollow items should be inverted and placed in the correct mobile
units, baskets, modules and inserts, to ensure that water can flow
in and out of them unrestricted.
- Deep-sided load items, e.g. trays, should be placed at an angle to
make sure water runs off them freely.
- Take apart any items which can be dismantled according to the
manufacturer's instructions and process the individual parts
separately from each other.
- Lightweight load items should be secured with a cover net (e.g. an
A 6 or A 810) and small items placed in a mesh tray to prevent them
from blocking the spray arms.
- The spray arms must not be blocked by load items which are too
tall or which hang down in their path.
- Broken glass can result in serious injury when loading or unloading.
Load items with broken glass must not be processed in the
machine.
- Nickel and chrome-plated load items, and items made of
aluminium, require special procedures and are not generally
suitable for machine reprocessing. They require special processing
conditions.
Areas of application
37
Advertisement
Table of Contents
