Table of Contents
Advertisement
Programme chart
Programme
(Free memory)
(Free memory)
Vario TD Inst 4trays
Vario TD Inst 6trays
Vario TD MIS
Vario TD Inst 8trays
Vario TD AN
Vario TD GYN
154
Use
Programmable programme for special applications;
programming by arrangement with the
Service Department.
Programmable programme for special applications;
programming by arrangement with the
Service Department.
Cleaning and disinfection programme, compliant with
EN ISO 15883, for reprocessing instruments in
mobile unit for 4 DIN mesh trays.
Cleaning and disinfection programme, compliant with
EN ISO 15883, for reprocessing instruments in mobile
unit/basket combinations for 6
trays.
Special cleaning and disinfecting programme, compliant
with EN ISO 15883, for processing instruments from
minimal invasive surgery (MIS).
Cleaning and disinfection programme, compliant with
EN ISO 15883, for reprocessing instruments in 8
mesh trays.
Special cleaning and disinfecting programme with
higher water levels for processing
anaesthetic utensils. This programme is compliant with
EN ISO 15883 80 °C (+5 °C, -0 °C) with a 10-minute
holding time for medical devices that come into direct
contact with the skin.
Special cleaning and disinfecting programme, compliant
with EN ISO 15883, for reprocessing gynaecological
instruments (GYN).
Miele
Customer
Miele
Customer
A 202
A 202
and
A 103
mesh
A 208
Pre-wash
1
2
CW
1 Min
CW
1 Min
CW
1 Min
CW
1 Min
CW
1 Min
CW
1 Min
3
Advertisement
Table of Contents
