Create Backup Copy - Pilz PSS WIN-PRO Getting Started

Functions

Create backup copy

The linked program from the programmable safety system can be
uploaded and stored. This backup copy cannot be edited. However, it can
be downloaded again to a PSS.
The backup copy of the FS program is created in FS mode and the backup
copy of the ST program in ST mode.
1. Connect computer
2. Set the Mode
3. Start upload
4. Enter storage location
5-4
Connect your computer to the PSS (see also "Connect computer to
PSS").
Switch to FS mode if you wish to create a backup copy of the FS pro-
gram or ST mode if you wish to make a backup copy of the ST pro-
gram.
Select PSS -> Create Backup Copy .
The process is documented in the information window under the
Upload tab. If the information window is not displayed, select View ->
Information Window .
Enter the path and name under which the backup copy is to be stored.
PSS WIN-PRO Service Version: Getting Started