Connect Computer To Pss - Pilz PSS WIN-PRO Getting Started

Connect computer to PSS

Most functions require a connection between the computer and the PSS.
Fig. 5-2: Connect computer to PSS
The PG interface on the PSS may be an RS 232 and/or an RS 485
interface (see the operating manual for the relevant safety system). If the
PG interface on the PSS is different to the interface on the computer, you
will need to connect via an interface adapter.
If the programmable safety system has an ETH-2 interface, data can also
be transferred via Ethernet.
Once you have established a physical connection between the PSS and
the computer you will need to set the correct interface in PSS WIN-PRO:
Check that the correct interface is set on the PG Interface tab under Tools
-> Options .
In the Online Timeout field you can state the length of time for which PSS
WIN-PRO should attempt to establish a connection with the PSS, when
switching to online mode. If the connection cannot be made after the
preset time, an error message will be displayed.
PSS WIN-PRO Service Version: Getting Started
5-3