Auto Power-On Select; Mini Pcie Signal Select - DFI SD100-H110/Q170 User Manual

Auto Power-on Select

JP5 is used to select the method of powering on the system. If you want the system to power
on whenever AC power comes in, set JP5 pins 2 and 3 to On. If you want to use the power
button, set pins 1 and 2 to On.
When using JP5 "Power On" feature to power the system back on after a power failure occurs,
the system may not power on if the power lost is resumed within 5 seconds (power flicker).
Chapter 2 Hardware Installation
Chapter 2
JP5
1 2 3
1-2 On:
Power-on via power button
(default)
1 2 3
2-3 On:
Power-on via AC power

Mini PCIe Signal Select

JP1 is used to select the Mini PCIe signal.
17
1 2 3
JP1
1-2 On:
Mini PCIe (default)
1 2 3
2-3 On: mSATA
(SD100-Q170 Only)
www.dfi .com