Security - DFI SD100-H110/Q170 User Manual

PC Health Status
This field displays the PC health status.
InsydeH20 Setup Utility
Advanced
PC Health Status
Voltage
VCORE 0.992 V
5V 5.056 V
+12V 12.144 V
1.200 V
VDDQ
3.056 V
VBAT
3VSB 3.228 V
Temperature
34.0 C/ 93.2 F
System ( o C/ o F)
CPU ( C/ F) 40.5 C/ 104.9 F
o o
Fan Speed
0 RPM
SYS FAN
CPU FAN 1962 RPM
SYS FAN 2 0 RPM
F1 Help ↑/↓ Select Item F5/F6
Esc Exit ←/→ Select Item Enter
Chapter 3 BIOS Setup
Chapter 3
Rev. 5.0
Change Values F9 Setup Defaults
Select SubMenu F10 Save and Exit


Security

This section configures the HDD security.
Main Advanced Security
Supervisor Password
Set Supervisor Password
Set All Hdd Password
Set All Master Hdd Password
Storage Password Setup Page

F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Set Supervisor Password
Set the administrative password for entering the BIOS utiity or upon the entering of
the power-on self-test (POST) process. The length of the password must be greater
than 1 character and less than or equal to 10 characters.
Set All Hdd Password
Set password for all HDDs. The length of password must be greater than 1 character
and less than or equal to 32 characters.
This item will be displayed when the security mode of HDD is not Lock.
Set All Master Hdd Password
Set the master password for all HDDs. The length of password must be greater than
1 character and less than or equal to 32 characters.
This item will be displayed when the security mode of HDD is not Lock.
39
InsydeH20 Setup Utility Rev. 5.0
Boot Exit
Storage Password Setup
Page
Not installed
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

www.dfi.com