Exit - DFI SD100-H110/Q170 User Manual

PXE Boot to LAN
Disables or enables PXE boot to LAN.
USB Boot
Enable or disable to change USB boot devices boot order.
Quiet Boot
Enable or disable booting in text mode.
Chapter 3 BIOS Setup
Chapter 3

Exit

Main Advanced
Exit Saving Changes
Load Optimal Defaults
Discard Changes
Save Setting to file
F1 Help ↑/↓ Select Item
Esc Exit ←/→ Select Item
Exit Saving Changes
Select Yes and then press <Enter> to exit the system setup and save your
changes.
Load Optimal Defaults
Select YES and then press <Enter> to load optimal defaults.
Discard Changes
Select YES and then press <Enter>to exit the system setup without saving your
changes.
Save Setting to file
Select this option to save BIOS configuration settings to a USB flash device.
Restore Setting from file
This field will appear only when a USB flash device is detected. Select this field to
restore setting from the USB flash device.
57
InsydeH20 Setup Utility
Security Boot Exit
Exit system setup and save
your changes.
F5/F6 Change Values F9 Setup Defaults
Enter Select SubMenu F10 Save and Exit

Rev. 5.0
www.dfi.com