Table of Contents
Advertisement
SUN600-(5KTL, 6KTL)-L0
User Manual
● The PE point at the AC output port is used only as a PE equipotential point, and
● Keep the AC output power cable and the PE cable close to each other.
● Keep the AC output power cable and the DC input power cable close to each
● Ensure that the cable jacket is inside the connector.
● Ensure that the exposed core is totally inserted into the cable hole.
● Ensure that AC output cable is secured. Failing to do so may cause inverter
● Ensure that the cable is not twisted.
Figure 5-7 Assembling an AC connector (three-core wire)
Figure 5-8 Assembling an AC connector (two-core wire)
Issue 04 (2023-02-17)
NO TICE
cannot substitute for the PE point on the enclosure.
other.
malfunction or damage to its AC connector.
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
45
Advertisement
Table of Contents
