Advertisement
Huawei OptiXstar S890H
Quick Start
Table 4-1 Indicator status description
Indicator
Panel
indicator
Issue 02 (2022-12-01)
Status
Steady green
Steady red
Blinking red
slowly (once
per second)
Steady
yellow
Off
NO TE
The S890H must work with a remote S1016 power module and a Wi-Fi 6 AP. When one end
of the S890H is connected to a photoelectric composite cable, the S890H is not running by
default. The S890H can be started only after the XGE port is connected to a network cable
and the other end of the network cable is connected to an AP.
Copyright © Huawei Technologies Co., Ltd.
4
Indicator Description
Description
The optical port is registered successfully and the
device is running properly.
The device is starting.
The device is faulty (such as system self-check
failure).
The PON upstream network is not connected.
No AP is connected or no photoelectric composite
cable is connected. The device is not running.
4 Indicator Description
9
Advertisement
