AEG BSE792280M User Manual page 64

Step 2 Remove the lid of the water drawer. Lift the
cover in correspondence with the protru‐
sion in the rear.
Step 3 Remove the wave-breaker. Pull it away
from the drawer body until it pops out.
Step 4 Wash the water drawer parts with water and soap. Do not use abrasive sponges and do not clean
the water drawer in a dishwasher.
Step 5 Reassemble the water drawer.
Step 6 Snap in the wave-breaker. Push it into the
drawer body.
Step 7 Assemble the lid. First insert the front snap
and then push it against the drawer body.
Step 8 Insert the water drawer.
Step 9 Push the water drawer towards the oven
until it latches.
11.6 How to use: Descaling
Turn off the oven and wait until it is
cold.
Duration of the first part: around 100 min
Step 1 Select: Menu / Cleaning / Descaling.
Step 2 Place the deep pan on the first shelf position.
Step 3 Pour 250 ml of the descaling agent in the water drawer.
Step 4 Fill the remaining part of the water drawer with water to the maximum level.
Step 5 After the first part is over, empty the deep pan and put it back on the first shelf position.
Duration of the second part: around 35 min
Step 6 Fill the water drawer with water. Make sure there is no remaining descaling agent inside the water
drawer. Insert the water drawer.
Step 7 When the function ends, remove the deep pan.
When this function works, the lamp is off.
64 ENGLISH
M
A
X
M
A
X
Before you start:
Remove all accessories.
M
A
X
Make sure that the water drawer is
empty (use: Tank emptying function).