Attaching The Backplate - EK-Quantum Vector FTW3 RTX 3070 Ti Backplate User Manual

Thermal Pad G 2.0 mm
Thermal Pad G 1.5 mm
M2.5 x 8 AX1 Screw
STEP 3
Once cut to size thermal pads should be applied to the backplate as
shown in the image.
STEP 3
STEP 4

ATTACHING THE BACKPLATE

Place the backplate on to the PCB aligning all of the holes. Position
an M2.5 x 8 AX1 screw in each of the six (6) mounting holed marked
below and then tighten them evenly using a Phillips head screwdriver.
Do not use excessive force!
For this Step, you will need:
STEP 4
- 7 -
Phillips Head M2.5 x 8 AX1
Screwdriver Screw (6 pcs)