Testing The Loop; Warranty - EK-Quantum Vector FTW3 RTX 3070 Ti Backplate User Manual

TESTING THE LOOP

To ensure the installation of EK components was successful, we
recommend you perform a 24-hour leak test.
When your loop is complete and filled with coolant, connect the
pump to a PSU outside your system. Do not connect power to any
of the other components. Turn on the PSU and let the pump run
continuously. Inspect all parts of the loop, and in case the coolant
leaks, fix the issue and repeat the testing process.
To prevent possible damage, please ensure that all hardware is dry
before the system is powered on.

WARRANTY

Our products are warranted against defects of materials and quality for
a period of 24 months, starting with the date of delivery to the end-user.
During this period, products will be repaired or have parts replaced at
our discretion, provided that 1) the product is returned to the agent from
whom it was purchased; 2) the product has been purchased by the end-
user and has not been used for commercial purposes; 3) the product has
not been misused, handled carelessly, or used in a manner other than the
way described in the instructions manual. This warranty does not confer
rights other than those expressly set out above and does not cover any
claims for consequential loss or damage. This warranty is offered as an
extra benefit and does not affect your statutory rights as a consumer.
This warranty is voided if the product comes in contact with aggressive
UV additives or other improper liquids. EK water blocks are sealed with a
warranty-voiding circular label, proving the water block has withstood a
pressure leak test. Removing the label will void the leak-free guarantee,
but not the guarantee on the product itself. Any other RMA issues can
be reported to EK Customer Support at www.ekwb.com/support for
further analysis.
- 8 -