Technical Data; Installation Of The External Kit (Gi3) - MAXA i-290 0106 Installer Manual

5.13.2 Technical data
Technical characteristics
Supply voltage
Supply frequency
Maximum power absorption
Maximum current for DO
Min/Max ambient operating temperature
Operating weight
5.13.3 Installation of the external kit (GI3)
The product has an IPX4 protection rating and can be installed outdoors.
The box is supplied with brackets for fixing with nuts and washers. Refer to the pictures below for mounting the supports to the box and for
drillings. The dowels are not supplied, choose the most suitable ones according to the type of wall where the product will be fixed and the weight
shown in the table.
Check that the supporting wall and dowels are adequate to support the weight of the product.
Steps for the correct installation of the KIT:
1. Use the WGI cable supplied with the external module to connect to the newly positioned heat pump terminals in the order shown in the
table:
38
261
220
Additional wire colour
Brown
Purple
Green
i-290
Inverter air/water heat pumps with axial fans
116
128
Unit
V
Hz
kW
A
°C
kg
Terminal code
GND
+
-
Value
230
50
1,5
0,5
-20 / +50
5,3