i-290
Inverter air/water heat pumps with axial fans
5.8 ACCESS TO THE INNER PART
5.8.1 Models i-290 0106 / 0109
2
1
Removal of plastic grille:
1. Unscrew the M5 screws (number 1, 2) using a cross screwdriver.
2. Slide the grille upwards to pull out the interlocking tabs (as shown in detail).
3. Pull the grille out.
4. Repeat the steps described for the other two grills.
7
8
6
5
Removal of cover and side panel:
1. Unscrew the M4 screws (number 5, 6, 7, 8) using a cross screwdriver.
2. Remove the sheet by pulling it upwards.
3. Unscrew the M4 screws on the panel with a cross screwdriver and pull it upwards in order to release the attachment tabs.
4. Pull the panels forward to remove them.
23