Technical Data Table; Installation; Laws, Technical Rules And Norms - Lotus PCC-74ET Instructions For Installation And Use Manual

Electrical glass ceramic cooking top

Hide thumbs

Table of Contents

Available languages

DIMENSIONS

POWER SUPPLY

MAXIMUM ABSORPTION

MAXIMUM POWER

POWER SUPPLY CABLE

POWER SUPPLY

MAXIMUM ABSORPTION

MAXIMUM POWER

POWER SUPPLY CABLE

POWER SUPPLY

MAXIMUM ABSORPTION

MAXIMUM POWER

POWER SUPPLY CABLE

The data plate is on the back panel (see diagram in electric connection item) and has all the data necessary for the

connection.

When fitting, the appliance must be levelled using a spirit level; slight differences of level can be adjusted by screwing

or unscrewing the adjustable feet. The main switch or the socket must be near the appliance and easily accessibile.

It is advisable to place the appliance under an extractor hood so that steam is extracted rapidly. If the appliance is placed

near walls, dividing panels, kitchen furniture, decorative finishings, etc., these should be in flameproof material;

otherwise it is necessary to cover them with non-flammable material.

Above all, it is necessary to ensure that the fire prevention norms are observed.

Installation must be carried out observing the following norms:

- Safety prescription in force

- Installation prescription, ECI norms.

The installation, starting up and maintenance of the appliance must be carried out by qualified personnel. All operations

done when installing must be carried out observing the norms in force.

The manufacturer declines all responsibility in the event of incorrect functioning due to wrong installation or

installation which does not comply with the norms.

Attention! In accordance with international rules, when connecting the appliance, an automatic device enabling the

disconnection of all contacts from the mains, must be installed above it; this device must have a contacts opening of at

least 3 mm.