Table of Contents
Advertisement
7 Disassembly
7.1 Disassembling the product
1.
Switch off the products.
2.
To disconnect the VITOM EAGLE from the power supply, remove the VITOM EAGLE power
cable from the power supply.
3.
Disconnect the holding system from the power supply.
4.
Disconnect the IMAGE1 S and the 4U-LINK from the power supply.
5.
Wait until the VITOM EAGLE has completely cooled down.
6.
Remove and dispose of the sterile drapes.
7.
Remove the camera head cable from the 4U-LINK and switch the light source to standby mode.
8.
Remove the IMAGE1 PILOT from the holding system.
9.
The VITOM EAGLE can be left on the holding arm or dismounted for storage.
Instructions for use • VITOM EAGLE • TVA900_EN_V1.0_05-2023_IFU_CE-MDR
Disassembly
29
Advertisement
Table of Contents
