Configuration Menus Overview - Rayleigh Instruments RI-ENERGYFLOW-3P-MODULAR RI-ENERGYFLOW-HYBRID User Manual

4.3 Configuration Menus Overview

Menu Menu Menu
Level 1 Level 2 Level 3
Enter
Passwor
SYS
SET UP d
Setting
(Default
00000)
Menu Menu Menu Level
Level 4 Level 5
Charge from
Self Grid
Consum Enable
e Disable(def
ault)
Time
Setting
Work
Mode
Peak
SHIFT
Charge
DISCHG
BAT Priority
Independent
Parallel
PV input
CV
Zero
Enable Disable
export
46
Default
6
Selection
The energy generated by the
solar panels will be used in
the following order: Feed the
home loads; Charge the
battery and then, feed into the
grid. When the sun is not
Enable present, the load will be
supported by the battery to
enhance self-consumption. If
the power supply from the
batteries is not sufficient, the
grid will support the load
demand.
This mode is designed for
time-use mode. The customer
can set up the desired
charging/discharging time &
power via the inverter screen
or APP.
Disable
Manually forces the system to
charge the batteries from the
grid.
Manually forces the system to
discharge to the connected
load.
The battery is only used as a
backup power supply when
the grid fails. As long as the
grid works, the batteries won't
Disable
be used to power the loads.
The battery is charged with
the power generated by the
PV system or from the grid.
Allows the user to change the
PV array configuration (wiring
Independ changes would also
ent apply!) .When parallel input is
set to be independent mode,
PV power will be imbalanced.
Allows the user to stop the
Disable
system exporting to the grid.
Comment