4.1.1
Key Feature and Block Diagram
Support 4-Lane MIPI CSI Interface and connect with main board through a 36 pin Gold-Finger.
•
Integrate a 1.0V LDO circuit for camera digital power supply, a 2.8V LDO circuit for camera analog power supply and a
•
1.8V LDO circuit for camera I/O power supply.
MediaTek Proprietary and Confidential. © 2022 MediaTek Inc. All rights reserved. Unauthorized reproduction or disclosure of this document, in whole or in part, is strictly prohibited.
Figure 4-3. Block Diagram of D2 Camera DTB Board
Genio 700 EVK
Genio 700 EVK Hardware User Guide
26